Installation Guides

Road Tax/Mirror Sticker installation:-

1. Clean and dry the surface. Peel off the backing paper.

2. Apply behind the road tax.

3. Rub firmly to squeeze out the air bubbles.

Click here

Emblem installation:-

1. Unwrap the emblem box.

2. Remove from the box.

3. Apply it at the clean and dry surface.

Click here

Small sticker installation:-

1. Thoroughly clean the surface where the sticker is to be applied.

2. Carefully remove the backing paper from the sticker.

3. Slowly row the sticker on the surface prepared, rub it in place with squeegee or similar item from the middle to outer edges to make sure there’s no air trapped under the sticker. Leave the application tape on for 10 -20 minute before removing.

4. Slowly remove the application tape, make sure does not lift up the sticker with the tape.

Big decals installation:-

1, Thoroughly clean the surface where the stickers is to be applied.

2.Remove the backing paper from the sticker, spray the soap water at the sticker and also the surface. Place the sicker on the surface.

3. Before removing the application tape, rub it in place with squeegee from the middle to outer edges. Make sure there’s no air bubbles trap under the sticker.

4. Remove the application tape, and clean the entire surface with clean water.

* If Air bubbles trapped. Use a pin to poke any air bubbles, push the air out from the hole.